WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Kodo Pro Brings The Tooth and The Claw
Do your oils right by enjoying them with the help of our Wulf Mods Kodo Pro Cartridge Vaporizer! These 510 threaded compatible cartridge vaporizers run off of a 400mAh battery, have a vivid OLED display for session info, and can supercharge hits with its 10s preheat function.
For truly pro vaping, the Kodo Pro has incrementally adjustable voltages all the way from 1.8v to 4.2v complete with dedicated + and - buttons to make changing temperatures as seamless as possible. Take a look at the 9 available color options to choose the Kodo Pro that fits your vibes and start getting more from your cartridges with every hit!
Loading A Cartridge Into The Kodo Pro
To load your Kodo Pro gently twist your chosen 510 threaded cartridge into the port on top of the device. Continue twisting until the cartridge is flush against the Kodo Pro.
Using Your Kodo Pro
To start off your Kodo Pro cloud blowing adventures simply press the power button 5 times in succession. This will cause your OLED screen to spring to life and your battery to power on.
When your session is complete simply press the power button an additional 5 times in a row and your Kodo Pro will safely shut down.
Adjusting The Kodo Pro’s Temperature
To swap between temperatures, make use of the Kodo Pros front facing + and - buttons. These allow you to adjust voltages point by point between the available options and precisely tune your sessions just how you like them.
Pre-Heating Your Kodo Pro
Blast off with a super charged cloud by tapping the power button 2 times in a row. This will begin the 10s preheat countdown wherein your cartridge will be slowly warmed over the 10s to prepare you a hit with increased potency and cloud volume.
How To Charge The Kodo Pro
Keep your Kodo Pro in the running by making use of the USB-C port located on the bottom of the device. The first time you charge your Kodo Pro, leave it plugged in for a full 2 hours. Every other time after this never charge the device longer than 1 hour at a time. This will ensure safe charging and improve the Kodo Pro’s battery lifespan.
Troubleshooting Your Kodo Pro
Auto Shut Off Warning - If you hold the power button down for longer than 15s, your Kodo Pro lights will flash 8 times in a row and power down to protect your session.
No Cartridge Warning - If your cartridge is not detected, the Kodo Pro will flash its LEDs 5 times in a row to let you know something is wrong.
Short Circuit Warning - Should the Kodo flash 3 times and shut off, this is an indication your Kodo is experiencing a short circuit. Leave the Kodo Pro off and do not attempt to use it subsides.
Low Battery Warning - When you have a low battery, the LED will flash 10 times and power off. This is to let you know it needs a recharge.
How To Clean the Kodo Pro
To clean your Kodo Pro first remove your cartridge and then proceed to wipe down the body of the device with a damp sanitary cloth or wipe.
For the threaded 510 port on top, we recommend using a q-tip or swab lightly damped with isopropyl alcohol to achieve the best results.
What’s Included:
- (1) Wulf Mods Kodo Cartridge Vaporizer
WARNING: Do not charge with a power bank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
You may also like
Recently viewed
